Category:
Cylinders & Jacks
Series:
HS Series
Type:
Single Acting
Hollow plunger design allows for both pull and push forces.
Collar threads for easy fixturing.
Chrome plated floating centre tube increases product life.
(on models with capacity > 20 ton)
Stop ring for piston blow-out protection.
Carrying handles / lifting eyes for portability.
(on selected models)
| Model | Capacity | Stroke | Oil Capacity | Collapsed Height | Extended Height | Outside Diameter | Plunger Diameter | Centre Hole Diameter | Weight |
|---|---|---|---|---|---|---|---|---|---|
20 ton | 49 mm | 150 cc | 162 mm | 211 mm | 98 mm | 54.1 mm | 26.9 mm | 7.7 kg | |
20 ton | 155 mm | 476 cc | 306 mm | 461 mm | 98 mm | 54.1 mm | 26.9 mm | 14.1 kg | |
30 ton | 64 mm | 298 cc | 178 mm | 242 mm | 114 mm | 63.5 mm | 33.3 mm | 10.9 kg | |
30 ton | 155 mm | 722 cc | 330 mm | 485 mm | 114 mm | 63.5 mm | 33.3 mm | 21.8 kg | |
60 ton | 76 mm | 626 cc | 247 mm | 323 mm | 159 mm | 91.9 mm | 53.8 mm | 28.1 kg | |
60 ton | 153 mm | 1,259 cc | 323 mm | 476 mm | 159 mm | 91.9 mm | 53.8 mm | 35.4 kg | |
95 ton | 76 mm | 1,011 cc | 254 mm | 330 mm | 212 mm | 127 mm | 79 mm | 63 kg |
The maximum operating pressure of all the above models is 700 bar / 10,000 psi.
Our ratings of load capacity and stroke are maximum safe limits.
Good practice encourages using only 80% of these ratings!
For example: a 60 ton cylinder should be used in order to lift a maximum load of 48 ton.
ZC-F1B female coupler and dust cap included on all models.
Customised HS cylinders can be made against order.