Series:
TC Series
Type:
Single ActingLoad Return
Features:
To be used at places where minimum insertion clearance is available but a very high lift is required.
High stroke = Low capacity
Low stroke = High capacity
Baked enamel finish for increased corrosion resistance.
Chrome plating on the plunger avoids erosion and results in less friction.
Each cylinder has a flat grooved saddle.
Lifting eyes for portability on all cylinders.
| Model | Capacity | Stroke | Oil Capacity | Collapsed Height | Extended Height | Outside Diameter | Plunger Diameter | Saddle Diameter | Weight |
|---|---|---|---|---|---|---|---|---|---|
30 ton @ 1st Stage
10 ton @ 2nd Stage | 135 mm @ 1st Stage
135 mm @ 2nd Stage
= 270 mm | 810 cc | 250 mm
+ 19 mm (saddle height) | 520 mm
+ 19 mm (saddle height) | 110 mm | 75 mm @ 1st Stage
45 mm @ 2nd Stage | 48 mm | 18 kg | |
60 ton @ 1st Stage
30 ton @ 2nd Stage
10 ton @ 3rd Stage | 145 mm @ 1st Stage
145 mm @ 2nd Stage
145 mm @ 3rd Stage
= 435 mm | 2,250 cc | 280 mm
+ 19 mm (saddle height) | 715 mm
+ 19 mm (saddle height) | 153 mm | 110 mm @ 1st Stage
75 mm @ 2nd Stage
45 mm @ 3rd Stage | 78 mm | 40 kg | |
40 ton @ 1st Stage
15 ton @ 2nd Stage | 150 mm @ 1st Stage
150 mm @ 2nd Stage
= 300 mm | 1,308 cc | 280 mm
+ 19 mm (saddle height) | 580 mm
+ 19 mm (saddle height) | 125 mm | 90 mm @ 1st Stage
55 mm @ 2nd Stage | 63 mm | 28 kg | |
100 ton @ 1st Stage
40 ton @ 2nd Stage
15 ton @ 3rd Stage | 170 mm @ 1st Stage
170 mm @ 2nd Stage
170 mm @ 3rd Stage
= 510 mm | 3,543 cc | 320 mm
+ 19 mm (saddle height) | 830 mm
+ 19 mm (saddle height) | 175 mm | 135 mm @ 1st Stage
90 mm @ 2nd Stage
55 mm @ 3rd Stage | 112 mm | 60 kg | |
60 ton @ 1st Stage
30 ton @ 2nd Stage | 150 mm @ 1st Stage
150 mm @ 2nd Stage
= 300 mm | 2,088 cc | 304 mm
+ 23 mm (saddle height) | 604 mm
+ 23 mm (saddle height) | 152 mm | 110 mm @ 1st Stage
75 mm @ 2nd Stage | 85 mm | 45 kg | |
150 ton @ 1st Stage
60 ton @ 2nd Stage
30 ton @ 3rd Stage | 200 mm @ 1st Stage
200 mm @ 2nd Stage
200 mm @ 3rd Stage
= 600 mm | 6,803 cc | 366 mm
+ 23 mm (saddle height) | 966 mm
+ 23 mm (saddle height) | 220 mm | 165 mm @ 1st Stage
110 mm @ 2nd Stage
75 mm @ 3rd Stage | 142 mm | 106 kg | |
100 ton @ 1st Stage
50 ton @ 2nd Stage | 150 mm @ 1st Stage
150 mm @ 2nd Stage
= 300 mm | 3,800 cc | 350 mm
+ 29 mm (saddle height) | 650 mm
+ 29 mm (saddle height) | 170 mm | 135 mm @ 1st Stage
95 mm @ 2nd Stage | 105 mm | 68 kg | |
200 ton @ 1st Stage
100 ton @ 2nd Stage
50 ton @ 3rd Stage | 200 mm @ 1st Stage
200 mm @ 2nd Stage
200 mm @ 3rd Stage
= 600 mm | 9,500 cc | 390 mm
+ 29 mm (saddle height) | 990 mm
+ 29 mm (saddle height) | 230 mm | 190 mm @ 1st Stage
135 mm @ 2nd Stage
95 mm @ 3rd Stage | 160 mm | 152 kg |
Our ratings of load capacity and stroke are maximum safe limits.
Good practice encourages using only 80% of these ratings!
For example: a 50 ton cylinder should be used in order to lift a maximum load of 40 ton.
ZC-F1B female coupler and dust cap included on all models.
Customised TC cylinders (with tilt saddles and special attachments)
can be made against order.