Series:

FJT

Type:

Single Acting

⤵️ To be used at places where minimum insertion clearance is available but a high lift is required

⤵️ Mounting holes enable easy fixturing

⤵️ Baked enamel finish for increased corrosion resistance

⤵️ Roller burnished bores to harden the surface and make it smoother

✅ ZC7FP1 female coupler with dust cap included on all models

✅ Customised FJT cylinders can be made against order

❗ The maximum operating pressure of all the Flat Telescopic Hydraulic Cylinders is 700 bar / 10,000 psi

❗ Our ratings of load capacity and stroke are maximum safe limits Good practice encourages using only 80% of these ratings

🔎 Looking for a telescopic cylinder with a higher stroke/collapsed height? Check out our (Telescopic) Hydraulic Cylinders

Model	Capacity	Stroke	Oil Capacity	Collapsed Height	Extended Height	Outside Diameter	Plunger Diameter	Weight	Return Type
FJT10	10 ton @ 1st Stage 5 ton @ 2nd Stage	10 mm @ 1st Stage 15 mm @ 2nd Stage = 25 mm	30 cc	49 mm	74 mm	83 mm x 60 mm	38 mm @ 1st Stage 26 mm @ 2nd Stage	1.6 kg	Load Return
FJT20	20 ton @ 1st Stage 5 ton @ 2nd Stage	11 mm @ 1st Stage 16 mm @ 2nd Stage = 27 mm	51 cc	57 mm	84 mm	99 mm x 76 mm	50 mm @ 1st Stage 31 mm @ 2nd Stage	2.7 kg	Load Return
FJT30	30 ton @ 1st Stage 15 ton @ 2nd Stage 5 ton @ 3rd Stage	12 mm @ 1st Stage 22 mm @ 2nd Stage 20 mm @ 3rd Stage = 54 mm	123 cc	64 mm	118 mm	123 mm x 98 mm	64 mm @ 1st Stage 46 mm @ 2nd Stage 26 mm @ 3rd Stage	4.7 kg	Load Return
FJT50	50 ton @ 1st Stage 15 ton @ 2nd Stage 5 ton @ 3rd Stage	15 mm @ 1st Stage 26 mm @ 2nd Stage 25 mm @ 3rd Stage = 66 mm	188 cc	74 mm	140 mm	148 mm x 120 mm	70 mm @ 1st Stage 46 mm @ 2nd Stage 26 mm @ 3rd Stage	7.9 kg	Load Return
FJT100	100 ton @ 1st Stage 30 ton @ 2nd Stage 10 ton @ 3rd Stage	15 mm @ 1st Stage 30 mm @ 2nd Stage 24 mm @ 3rd Stage = 69 mm	418 cc	93 mm	162 mm	188 mm x 160 mm	100 mm @ 1st Stage 69 mm @ 2nd Stage 38 mm @ 3rd Stage	16.9 kg	Load Return