Series:

Type:

Single Acting

⤵️ To be used at places where less insertion clearance is available but a very high lift is required

⤵️ Baked enamel finish for increased corrosion resistance

⤵️ Chrome plating on the plunger avoids erosion and results in less friction

⤵️ Each cylinder has a flat grooved saddle

⤵️ Lifting eyes for portability

✅ ZC7FP1 female coupler with dust cap included on all models

✅ Customised TC cylinders can be made against order

❗ The maximum operating pressure of all the Telescopic Hydraulic Cylinders is 700 bar / 10,000 psi

❗ Our ratings of load capacity and stroke are maximum safe limits Good practice encourages using only 80% of these ratings

🔎 Looking for a telescopic cylinder with less stroke/collapsed height? Check out our (Flat Telescopic) Hydraulic Cylinders

Model	Capacity	Stroke	Oil Capacity	Collapsed Height*	Extended Height*	Outside Diameter	Saddle Height	Weight	Return Type
TC1510	40 ton @ 1st Stage 15 ton @ 2nd Stage	135 mm @ 1st Stage 135 mm @ 2nd Stage = 270 mm	944 cc	283 mm	553 mm	110 mm	49 mm	15.1 kg	Load Return
TC1917	104 ton @ 1st Stage 45 ton @ 2nd Stage 19 ton @ 3rd Stage	145 mm @ 1st Stage 145 mm @ 2nd Stage 145 mm @ 3rd Stage = 435 mm	3,092 cc	345 mm	780 mm	170 mm	73 mm	40.3 kg	Load Return
TC2212	56 ton @ 1st Stage 22 ton @ 2nd Stage	150 mm @ 1st Stage 150 mm @ 2nd Stage = 300 mm	1,487 cc	317 mm	617 mm	125 mm	53 mm	21.8 kg	Load Return
TC2220	139 ton @ 1st Stage 56 ton @ 2nd Stage 22 ton @ 3rd Stage	170 mm @ 1st Stage 170 mm @ 2nd Stage 160 mm @ 3rd Stage = 500 mm	4,661 cc	395 mm	895 mm	200 mm	83 mm	67.3 kg	Load Return
TC3512	89 ton @ 1st Stage 35 ton @ 2nd Stage	150 mm @ 1st Stage 150 mm @ 2nd Stage = 300 mm	2,359 cc	352 mm	652 mm	160 mm	66 mm	39.9 kg	Load Return
TC3524	223 ton @ 1st Stage 89 ton @ 2nd Stage 35 ton @ 3rd Stage	200 mm @ 1st Stage 200 mm @ 2nd Stage 200 mm @ 3rd Stage = 600 mm	8,816 cc	476 mm	1,076 mm	250 mm	111 mm	124 kg	Load Return